Latest News
November 2011
Cube Offshore run integrated WEL GWA jacket and riser analysis for the GWF-A project using SACS modelling software
November 2011
Sang Soo Lim joins Cube Offshore's design team as a Structural & Civil Engineer
November 2011
Cube Offshore pass annual ISO9001 audit with flying colours and re-certify with QMS
October 2011
Cube Offshore move office to Lvl. 8, Exchange House, 68 St Georges Tce, Perth. All other contact details remain unchanged.
September 2011
Cube Offshore design and fabricate the Laminaria LRP connector guide frame package on budget and on schedule for Woodside's drilling & completion dept.
September 2011
Cube Offshore place David King as Principal Structural Engineer within the Inpex Ichthys project.
August 2011
Cube Offshore jointly develop a Safety Slick Joint downhole tool with Santos to reduce the risk of well string failure during workover operations.
April 2011
Cube Offshore awarded detailed design of retro-fitted Gangway Landing & Access Stair Tower for Heerema's WEL NR2 installation campaign.
March 2011
Keane Liew (Offshore Structural Engineer) joins Cube Offshore's design team.
March 2011
Cube Offshore design seafastenings for the Hess M-12 module on the Sea Trucks Jascon 25 installation vessel offshore Africa.
November 2010
Cube Offshore commence subsea structural concept and FEED engineering for the design of subsea structures and riser clamps for the WEL Greater Western Flank-A development.
October 2010
Cube Offshore contracted to develop and design a range of bunded fuel tanks to AS1692.
October 2010
Cube Offshore carry out structural integrity assessment for an Expro Group 90' Burnerboom mounted on the floating Atwood Osprey MODU for operating & extreme environmental conditions.
September 2010
Cube Offshore provide construction personnel and continued engineering services to Svitsea Group for the West Atlas Rig Salvage project.
August 2010
Cube Offshore awarded feasibility study and conceptual design of the modularisation of a well kill spread for Woodside Drilling & Completion.
July 2010
Cube Offshore awarded remedial structural analysis work by the Woodside NR2 Project for components of the NRB topsides integrated deck currently under construction in South Korea.
May 2010
Cube Offshore provide lifting certification & management services to AJ Lucas for the mobilisation phase of the CVX Gorgon HDD project on Barrow Island.
May 2010
Cube Offshore provide Independent Offshore Solutions with the design & engineering of a multi-purpose elevated transport grillage for the back deck of the AHT UOS Discovery. The transport grillage is 3m high by 14m wide by 15m long and supports a total of 1615Te of permanent equipment in a range of positions over a number of trips. Provision is made for loadout of concrete structures by skidding onto the grillage prior to transport to the offshore location for the Victorian Desalination Project
April 2010
Cube Offshore design, manufacture and deliver a Rotary Table Adaptor Plate to API 7K for Woodside Energy Ltd.
April 2010
Cube Offshore provide Sea Trucks with design and engineering services for the West Atlas Recovery Project. Work includes 2no. 25m West Atlas access towers, J25 gangway access towers, West Atlas deck checks & support grillages for mobile lifting equipment, West Atlas leg lifting & handling clamps, West Atlas cantilever & sub-base support clamps & lift design.
April 2010
Cube Offshore contracted to review, re-engineer and supply lift certification (CCLE) for 8no. separately lifted components of Benthic Geotech's mobile subsea drilling spread (PROD).
March 2010
Cube Offshore engaged to design and supply oilfield equipment to Woodside for the upcoming WCLH drilling & completion campaign.
February 2010
Cube Offshore support SeastreamJV with the design of 2no. subsea structures for the BHBP Pyrenees field development. The scope of work includes basis of design, concepts, structural design,
geotechnical design, cathodic protection design, rigging design, construction specifications and fabrication interface management. The subsea structures facilitate the ROV assisted installation & support of CVC goosenecks, flexible and umbilicals on the seabed and are ballasted to provide on-bottom stability in the presence of high seabed (Soliton) currents. The subsea structures are designed in accordance with API RP2A and DnV Marine Operations for inplace, vertical lift, side lift and transport (road & sea). The design was highly sympathetic to rapid fabrication of multiple frames with early material order and steel cutting facilitated by open communications and preliminary engineering cycles .
December 2009
Cube Offshore win contract from Australian Winch & Haulage to custom design offshore lifting frames for a range of heavy duty winches and powerpacks in accordance with Woodside Lifting Equipment Standard (W9000AG400).
November 2009
Cube Offshore design and deliver a lightweight protection & support structure for slickline operations to PTTEP in support of their Montara remedial work. Design & fabrication complete in 5 days with full shop drawings and offshore assembly instructions. Frame designed to be hand carried into final location with heaviest single component under 40kgs and simple pinned connections for ease of assembly.
November 2009
Cube Offshore achieve IS09001:2008 accreditation for their Quality Management Systems..
October 2009
Cube Offshore wins contract to supply engineering and fabrication services to Woodside Energy's Drilling & Completion division.
July 2009
Cube Offshore continues to support SeastreamJV with engineering and construction services for their Exmouth, WA mobilisation of the Jascon25 and offshore structures installation campaign as part of the BHBP Pyrenees Project.
June 2009
Cube Offshore supports Conquest Engineering with structural engineering services in support of their Woodside NR2 supply contract.
May 2009
Cube Offshore supports Ausclad with structural engineering services.
April 2009
Cube Offshore commences proceedings with Bureau Veritas for accreditation to AS/NZS ISO 9001:2008
April 2009
Cube Offshore signs contract with Clough to provide engineering support for the installation of the PTTEP Australasia Ltd. Montara field development
March 2009
Cube Offshore awarded contract for Expro 90' burnerboom and kingpost structural analysis on the Ensco 104 jack up drilling rig
February 2009
Cube Offshore supports Jascon 25 mobilisation from Singapore shipyard with site engineering personnel
January 2009
Cube offshore awarded the detailed design of 6no. pig receivers / pull in heads for BJ Process & Pipeline Services
November 2008
Tim Walsh, Senior Structural Engineer, joins Cube Offshore.
November 2008
Cube Offshore support Halliburton with the design, testing and fabrication of offshore baskets/containers to EN12079
October 2008
Cube Offshore support Expro Group with offshore lift certification for their burnerbooms
September 2008
Paul Monaco, Senior Structural/Mechanical Engineer, joins Cube Offshore.
September 2008
Cube Offshore commence work supporting Seastream JV Australia with their preparation for the subsea installation of the BHPBilliton Pyrenees field.
August 2008
Cube Offshore completes feasibility study design for 110t subsea pipeline bridge for a major pipeline design contractor and Australian operator.
July 2008
Cube Offshore undertakes 3rd party validation services for NOPSA on behalf of Coogee Resources for the Montara WHP Pile Hang-off Structure.
May-September 2008
Cube Offshore provide Structural Engineering support to Woodside as part of the NR2 Project.